Outlet Valve: The outlet valve fitted to the cylinders is a Snap Tight Valve, with standard diameter of 27mm, which also has a pressure relief valve fitted on its side. This prevents any over pressure build up in the cylinder.

Low-Pressure Single-Stage Regulators: These reduce the initial pressure of 3 - 6 bars in the cylinder to a pressure of 0.028 bars at the point of use of the gas. These regulators comply with BS 6016 rating or equivalent.

High-Pressure Double-Stage Regulators: These are designed to cater for larger consumers (hotels, restaurants, industries), and reduce the pressure progressively in two stages rather than one.

Multiple Cylinder Connection: For larger consumers (hotels, restaurants, industries), cylinders are connected by using a changeover manifold connected to a regulator. If the cylinder and connections are in the open air, then the piping, valves and connections must be protected from possible accidental or vandalism damage, by placing an appropriate protective cover over them.

Low Pressure Hose: Used to connect the regulator to your appliance.